Home   divider  Contact Us  divider   Free Quote
  • About Us
    • Contact Info
    • Testimonials
  • Products
    • Heating
    • Cooling
    • Ventilation
    • Quote
  • Services
    • Maintenance
    • Request
  • Support
    • FAQs
    • Glossary
    • Request Info

If you would like to sign up for one of the maintenance plans listed, click the agreement link below.

Agreement

 

For questions about our plans, you can call us at 574.825.8824 or click the request information link below.


Request Information

 


Save Money
    Promotions

    Tax Credits

    Rebates

Testimonials

"Thanks to Lee, for selling a great product and having installed for us the very best.  Needless to say, our gas bill is half of what it was a year ago."

 

 

Maintenance Plans
Maintenance plan A
  1. Clean and adjust automatic controls.
  2. Clean burners.
  3. Adjust combustion for optimum fuel efficiency.
  4. Lubricate as needed.
  5. Test for combustion leaks.
  6. Test safety shutoff response.
  7. Check blower belt wear, tension and alignment.
  8. Check flue for satisfactory operation.
  9. Replace or clean 1" air filter.
Maintenance Plan B
  1. Clean condenser coil if necessary.
  2. Check electrical connections for tightness.
  3. Adjust system for optimum cooling.
  4. Check for oil and refrigerant leaks.
  5. Check safety devices.
  6. Check blower belt wear, tension and alignment.
  7. Check expansion valve and coil temperatures.
  8. Check refrigerant level.
  9. Check condensate drain.
  10. Lubricate as needed.
  11. Replace or clean 1" air filters.
Maintenance Plan C
  1. Lubricate as needed.
  2. Check defrost cycle and reversing valve operation.
  3. Adjust air volume for maximum efficiency.
  4. Check safety devices and electrical connections for tightness.
  5. Check blower belt wear, tension and alignment.
  6. Check for oil and refrigerant leaks.
  7. Test electrical controls for proper operation.
  8. Check refrigerant level.
  9. Check refrigerant controls and coil temperature for maximum efficiency.
  10. Check condensate drain.
  11. Replace or clean 1" air filters.
Maintenance Plan D
  1. Clean and check automatic controls.
  2. Check all wiring for loose connections and condition of insulation.
  3. Check supply voltage.
  4. Check amperage craw.
  5. Lubricate as needed.
  6. Test safety shutoff response.
  7. Check blower belt wear, tension and alignment.
  8. Replace or clean 1" air filters.


Conditions


We agree to:
  1. Inspect the equipment on a scheduled basis as shown, and during each inspection perform the applicable services per above checklist.
  2. Instruct you in the operation of the equipment.
  3. Give our service contract holders preference over all other services activity normally undertaken by us.

You agree to:
  1. Operate the equipment according to our instructions.
  2. Promptly notify us of any unusual operating conditions of the equipment.
  3. Permit our personnel the use of your common building maintenance tools, such as ladders, etc.
  4. Permit only our service personnel and/or a service organization authorized by us to work on the equipment.

General:

During the term of the agreement we will take all reasonable precautions to avoid injury to persons and damage to property while on the premises, but we shall not be liable for any special or consequential damages.

We shall not be liable for losses or defect arising out of vandalism, fire, flood, wind, war, riots and acts of God. In such cases, the customer shall be charged for the parts and labor involved at the then current price for such repairs. No such parts or labor shall be furnished, however, without authorization from the customer.

© 2010 The Element Masters, Inc.         Designed by Inspired Images